Prasa the Piglet Amigurumi

 

Prasa the piglet is the second amigurumi pattern of my crochet farm animal series. I decided to make a piggy because I wanted to do something with my pink yarn. I like the color pink and if I can use it to make a stuffed animal, much better. I also like watching cartoons before where piggies were wearing sailor uniforms. They all look so cute in it so I made my own version of a wanna-be-sailor piglet amigurumi.

Finished size: approximately 6 inches if you will use same yarn and hok

Disclosure: This article may contain compensated links. This means that if you make a purchase after clicking on the link, I may receive a small commission at no extra cost to you.

Materials needed:

  • 1.75 mm hook
  • Polyester fiberfill stuffing
  • Light fingering weight yarn (YarnArt Cotton Soft) – color: pink, blue, red, white
    *Yarn can be substituted with 3 ply yarns (ex: Sirdar Snuggly 3-ply, King Cole Comfort 3-ply) or fine weight yarns like YarnArt Jeans and Catonia Originals but use a 2mm hook
  •  Stitch Marker (advisable)
  • Polyester Fiberfill Stuffing
  • 8mm safety eyes (if you’re using a different yarn, then it will depend on the size of your doll)
  • Yarn Needle

*Pattern is using US terms. Stuff as firmly as you can and work in continuous rounds unless otherwise specified.

 

Abbreviations:

St
Sl st
R
Ch
MR
SC
INC
DEC
FO








Stitch
Slip Stitch
Round
Chain
Magic Ring
Single Crochet
Increasing Stitch (make 2 SC in one stitch)
Decreasing Stitch (SC 2 stitches together)
Fasten Off

 

 

 Pin it that you’ve tried it and share it with your friends! Thanks for the support!

 

Amigurumi Doll Pattern

You will find the pattern below. But if you want a printable or downloadable version, you can purchase an inexpensive and ad-free PDF from Etsy or Ravelry. The PDF file has instructional texts and more photos for you to easily crochet this amigurumi doll.

HEAD (using pink)

R1: MR, ch 1, SC 6. (6)
R2: INC 6. (12)
R3: (SC, INC) x 6. (18)
R4: (SC 2, INC) x 6. (24)
R5: (SC 3, INC) x 6. (30)
R6: (SC 4, INC) x 6. (36)
R7: (SC 5, INC) x 6. (42)
R8: (SC 6, INC) x 6. (48)
R9: (SC 7, INC) x 6. (54)
R10: (SC 8, INC) x 6. (60)
R11: (SC 9, INC) x 6. (66)
R12: (SC 10, INC) x 6. (72)
R13-22: SC in each st around. (72)
–          Place the safety eyes in between R18 and R19, 10 stitches apart.
R23: (SC 10, DEC) x 6. (66)
R24: (SC 9, DEC) x 6. (60)
R25: (SC 8, DEC) x 6. (54)
R26: (SC 7, DEC) x 6. (48)
R27: (SC 6, DEC) x 6. (42)
R28: (SC 5, DEC) x 6. (36)
R29: (SC 4, DEC) x 6. (30)
R30: (SC 3, DEC) x 6. (24) – Stuff
R31: (SC 2, DEC) x 6. (18)
R32: (SC, DEC) x 6. (12)
R33: DEC x 6. (6)
– FO. Stuff firmly as you can.

*sl st. FO. You can put some blush on the cheeks by putting make-up or by embroidering with pink yarn.

EARS (make 2, use pink)

-always start your SC in the same st where you do your ch.

R1 : Ch 3, SC, INC, turn. (3)
R2 : Ch 1, SC 2, INC, turn. (4)
R3 :  Ch 1, SC 3, INC, turn. (5)
R4 :  Ch 1, SC 4, INC, turn. (6)
R5: Ch 1, SC 5, INC, turn. (7)
R6: Ch 1, SC 6, INC, turn. (8)
R7: Ch 1, SC 8, turn. (8)
R8 : Ch 1, SC 8, turn. (8)

– FO. Leave a long tail to sew on to the top side of the head, between rounds 7-14.

NOSE (use pink)


R1: MR, ch 1, SC 6. (6)
R2: INC 6. (12)
R3: (SC, INC) x 6. (18)
R4:  Sl st in each st around. (18)
R5: Work in the back of R4, which is R3, SC in each st around. (18)
– No need to sl st to finish the round.
R6-7: SC in each st around. (18)
– FO. Leave long tail to sew in between the last round where the eyes were placed. Stuff lightly before closing

LEGS (make 2, use pink)

 

R1 : Start with pink, MR, ch 1, SC 6. (6)
R2 : INC 6. (12)
R3 : (SC, INC) x 6. (18)
R4 : (SC 5, INC) x 3. (21)
R5-8: SC in each st around. (21)
R9 : INC, SC 20. (22)
R10: SC in each st around. (22)
R11: SC 10, INC, SC 11. (23)
R12: SC 11, INC, SC 11. (24)
R13: SC 12, INC, SC 11. (25)
R14: SC 12, INC, SC 12. (26)
R15: SC 13, INC, SC 12. (27)
R16: SC 13, INC, SC 13. (28)
R17: SC 14, INC, SC 13. (29)
R18: SC 14, INC, SC 14. (30)
*stuff firmly. FO on the LEG 1 only. LEG 2 will continue on with the body.

To connect the Legs (R19 of BODY)

1. Ch 3 in LEG 2.

two amigurumi legs

2. SC in LEG 1.

connecting amigurumi legs

3. R19 of BODY is complete.

BODY (use pink, blue)

 

R19: Continue from the LEG 2 using pink, ch 3, SC in the next st where you left off of LEG 1, SC 29 (LEG 1), SC 3 in one side of the ch, SC 30 (LEG 2), SC 3 in the other side of the ch. (66)
R20:  SC 29, INC, SC, INC, SC, INC, SC 27, DEC, SC 3. (68)
R21: DEC, SC 66. (67)
R22: SC in each st around. (67)
R23: SC 18, INC, SC 8, INC, SC 8, INC, SC 8, INC, SC 21. (71)
R24-25: SC in each st around. (71)
R26: SC 20, DEC, SC 6, DEC, SC 8, DEC, SC 6, DEC, SC 23. (67)
R27: SC 18, DEC, SC 5, DEC, SC 8, DEC, SC 5, DEC, SC 22. (63)
R28: SC 22, DEC, SC 5, DEC, SC 5, DEC, SC 25. (60)
R29: (DEC, SC 8) x 6. (54)
R30: SC in each st around. (54)
R31: (SC 7, DEC) x 6. (48)
R32-33: SC in each st around. (48)
R34: (DEC, SC 6) x 6. (42)
R35: SC in each st around. (42)
R36: SC 18, change to blue, SC 24. (42)
R37: (DEC, SC 5) x 2, DEC, SC 2, Work in BLO, SC 3, (DEC, SC 5) x 3. (36)
R38: Cont to work in BLO, SC 18, work in both loops, SC 18. (36)
R39: (DEC, SC 4) x 5, DEC, SC 2, change to pink, SC, change to blue, SC. (30)
R40: SC 27, change to pink, SC 3. (30)
R41: Change to blue, (SC 3, DEC) x 5, SC, change to pink, SC 2, DEC. (24)
R42: SC, change to blue, SC 20, change to pink, SC 3. (24)
R43: SC 2, change to blue, DEC, (SC 2, DEC) x 4, SC, change to pink, SC, DEC. (18)

– FO. Stuff. Leave long tail to sew to the head (between the last 4th and 3rd Round).

SKIRT (use blue, white)

– Make the skirt starting from top to bottom. Attach a blue yarn at the front loop of R38 of the body.

 
R1: Ch 1, SC in the same st, SC 11, INC, SC 12, INC, SC 12, INC. (42) – no need to sl st.
R2: (SC 6, INC)x 6. (48)
R3: SC in each st around. (48)
R4: (SC 7, INC) x 6. (54)
R5: SC in each st around. (54)
R6: (SC 8, INC) x 6. (60)
R7: (SC 9, INC) x 6. (66)
R8: (SC 10, INC) x 6. (72)
R9: (SC 11, INC) x 6. (78)
R10: (SC 12, INC) x 6. (84)
R11: (SC 13, INC) x 6. (90)
R12: (SC 14, INC) x 6. (96)
R13: SC in each st around. (96)
R14: (SC 15, INC) x 6. (102)
R15-17: SC in each st around. (102)
R18: Change to white, SC in each st around. (102)
– FO

Attach a blue yarn at the front loop R38 of the body.

ARMS (make 2, use pink, blue, white)

 

R1: MR, ch 1, SC 6. (6)
R2: INC 6. (12)
R3: (SC, INC) x 6. (18)
R4: SC in each st around. (18)
R5: (SC 5, INC) x 3. (21)
R6: (SC 6, INC) x 3. (24)
R7-11: SC in each st around. (24)
R12: (SC 6, DEC) x 3. (21)
R13-16: SC in each st around. (21)
R17: (SC 5, DEC) x 3. (18)
R18-19: SC in each st around. (18)
R20: Change to blue, SC in each st around. (18)
R21: Change to white, SC in each st around. (18)
R22: Change to blue, (SC 4, DEC) x 3. (15)
R23-24: SC in each st around. (15)
*sl st. FO. Leave long tail for sewing. Stuff lightly so that you can flatten the opening and sew them on the sides of the body. Sew it in between R41 and R42.

HAT (use blue, white)

-always start your SC in the same st where you do your ch.

 

R1: MR, ch 1, SC 6. (6)
R2: INC 6. (12)
R3: (SC, INC) x 6. (18)
R4: (SC 5, INC) x 3. (21)
R5: (SC 6, INC) x 3. (24)
R6-7: SC in each st around. (24)
R8 : Ch 1, turn, BLO, SC in the same st, SC 23, sl st. (24)
R9: Ch 1, SC in the same st, SC 23, change to white to do the sl st. (24)
R10: Ch 1, SC in the same st, SC 23, change to blue to do the sl st. (24)
R11: Ch 1, SC in the same st, SC 23, sl st. (24)
*FO. Leave long tail to sew it with a few stitches to the top side of the head.

Share this to your friends or add it to your Pinterest pins!

COLLAR (use white)

 

R1: Ch 17, SC 14, DEC, turn. (15)
R2-3: Ch 1, SC 15, turn. (15)
R4: Ch 1, sl st in the same st, sl st 10, SC 4, turn. (15)
R5-10: Ch 1, SC 4, turn. (4)
R11: Ch 1, SC 4, ch 12, turn. (16)
R12: Starting in second ch from hook, SC 15, turn. (15)
R13: Ch 1, SC 14, INC, turn. (16)
R14: Ch 2 (to get that pointy look), SC 16, ch 1. (16)
Lining of back part: SC in the same st, SC 12. (13)

 

Share this to your friends or add it to your pinterest pin!

 

TAIL (use pink)

 

R1: Ch 10 or ch as much as how long you want the tail to be, starting in the second ch from the hook, sl st 9. (9)
*FO. Leave tail to sew it on the backside in between R26 and R27.

For the tail hair, insert the hook through the starting st of the tail and pull the middle part of a pink yarn halfway through the st and then pull the tail ends of the yarn through the loop and tighten. Brush the strand of the yarn. Cut and style.

There you have it. Your own toy piglet amigurumi. If you have any questions, don’t hesitate to message me or comment down below.

I want to see your finished piglet amigurumi so please share it with me on Facebook or Instagram with the tag #adorabletinies.

Copyright protected. Please do not distribute, edit or share the pattern as your own design to anyone. You can however sell the product as long as you credit Adroble Tinies as the designer.

Little Chick Crochet  Ι  Back to Home  Ι  Pearl Doll Amigurumi

Do you want a PDF version?

If you want a printable version for you to easily follow through the steps, you can purchase the PDF version by clicking the download button below.

 

Follow me!